Hey guys, my 2012 street Bob is running very rough after I washed it, besides all the tips for not using pressure washers is there anyone that may know where to start,

It starts fine, but idles at about 1800-2000rpm for about 30 seconds then drops 10 between 700 and 1500 and almost sounds like its hunting and almost cuts out but then revs increase,

While riding under full load its clean but quarter throttle or less it stumbles and misses

So far I have opened the air cleaner and sprayed carb clean in the idle control valve, checked battery connections, spark plug connections

I want to check all wiring plugs etc

Any help would be appreciated

Many thanks
Stu

Sent from my SM-G970F using Tapatalk